Older Deluxe Innovations container fitment issue

The fit may be a little tight, but the Deluxe containers definately should fit in the well. One thing you may want to check is that you're not hitting something on one end... like the brake equipment. Also, did you buy the car new or was it used? If it's used, you might want to check and see if it was rebuilt by a previous owner after an accident... that might change how containers fit into the car... Paul

I have a set of the TwinStaks as well....as noted with the car, some brands of containers will not work, as the car is designed per the prototype (ie: to scale), where as some N-scale containers are not. I've found that some of the older DI cans don't fit. I've never actually split the web down the middle, but it has come off the bottom of the well before, and i've blown the ends out of the upper 'wells' before as well...a drop of CA cures it every time. I now have gotten used to it, and only put specific sets of cans in each well, as I know they fit well enough. This approach meant I had to buy more containers then I intended to, but it was worth it in my opinion. AR

Thanks for the responses guys. I'll try to contact DI about the issue even though they are out of production on the twinstacks. I've been fixing it with CA, but can't do that every time I decide to take a container off and watch the web come undone from the side plates.