Results 1 to 2 of 2

Thread: Product Review: Athearn's 20K Acid Tank Car -- Nice Runner

  1. #1
    Join Date
    Jan 2018
    Posts
    71
    Thanks
    0
    Thanked 160 Times in 37 Posts
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)

    Default Product Review: Athearn's 20K Acid Tank Car -- Nice Runner

    Author: gdm


    Athearn announced this model in January of 2018 and made its first delivery in January of 2019. It is a model of a tank car produced in the late 1990s or early 2000s specifically designed to carry corrosive liquids, such as sulphuric acid. The prototypical cars were made by GATX for their own fleet. The cars carry a list price of $26.98 each but you can find them at discounters for a hair more than $20 each. The initial release came in six paint schemes. These include three different GATX schemes, one GAMX (GATX's Mexico subsidiary), one PPG and one Occidental Chemical. Each scheme has three different road numbers.

    The Prototype
    GATXs North American tank car fleet consists of more than 59,000 cars with nearly 70 different types serving the chemical, petroleum, transportation, agriculture, food, mineral, and plastics markets. Major car groupings include general service and high pressure, and cars used to carry various types of acids and other specialty products. Customer logos can occasionally be found on GATX leased cars. These cars can be found interchanged all over North America on all major and short line railroads.

    The Box
    These cars are small enough that they nicely fit into ye olde 4.75" acrylic box known and loved by N Scale modelers everywhere. Athearn thankfully refrained from covering the acrylic box with a piece of cardboard. Athearn used to do this a lot. I suppose it protects the jewel boxes from scuffing, but it makes it annoying to get the cars in and out of their boxes and the cardboard slip-cover gets all kinds of banged up every time you remove it from the acrylic box. The car is inside a double-plastic nest and wrapped in a thin sheet of protective soft plastic as well. All nice and standard and will protect these cars nicely.

    The Couplers
    These cars use body-mounted real McHenry couplers, which do so-so when mating with MTL couplers. When using a mix and match of coupler types, it's not uncommon to have problems when running long consists. So I wanted to see how easy it would be to replace these McHenry couplers with MTL couplers. First I removed the trucks. This gave me access to the body-mount coupler box. Just as I suspected, once you unscrew the lid of the coupler box, the box still remains. This makes it more complicated to install a MTL body-mount coupler. The 1015 MTL coupler kit should work in this instance.

    Operation
    The wheels are nice quality blackened metal and low-profile. They roll really well. This smooth operation means that a long train of these cars will be easy to pull. Give them a little push and they just glide along the track. I give each railcar that I review a little push on a flat piece of Kato Unitrack and I expect them to sail along the track with a comforting sound of metal wheels on metal track. This car passed my pinkie-push test very nicely.

    The Model
    This is NOT a highly detailed model. Keep in mind this is a $20 model and there is a world of difference between a $20 model and a $30 model in the N Scale universe. What you do get is some really nice paint work on a simple body with a few nice detail parts. The details include the side ladders, roof valves and a brake wheel. Overall not that much more than a 1970s vintage car would typically have. What you do get is a really nice set of trucks and wheels with proper body-mounted couplers. These cars will operate very well and look great. Furthermore without a lot of detail, they will be hard to damage.


    What could have been better is that the moldings of smaller parts such as ladders and stirrups could have been a little less clunky. Today's injection molding process can handle very thin details. There is no reason for the stirrups to be THIS thick. Also, the seam where the top half of the body is glued to the bottom half is very visible. It seems once again that with modern assembly techniques this didn't need to be quite so obvious.

    Summary
    I applaud Athearn for putting out a nice 'runner' car at the $20 price point. It would be nice if they were about $5 cheaper per unit as this is a fairly basic car, but production costs in China are rapidly rising and the day of the $10 car is long gone. They are not very colorful (with the exception of the Occidental cars) but the paint schemes seem to be accurate, and I guess the railroads don't want to draw too much attention to tank cars filled with noxious chemicals. These cars are well packaged, durable and run great. If you want to run long consists mixed with other manufacturers' cars, I would buy just one and try to upgrade the couplers to MTL or at the very least, test run the cars with your other cars to make sure they stay coupled while being pulled. If they consists hold together in curves and on grades, then you can safely buy more.


  2. The Following 4 Users Say Thank You to Jenna For This Useful Post:


  3. #2
    Join Date
    Jan 2017
    Posts
    980
    Thanks
    2,366
    Thanked 956 Times in 506 Posts
    Mentioned
    33 Post(s)
    Tagged
    0 Thread(s)

    Default

    Looks like the same mold was used from the Roundhouse 50' Modern Tank Car series less the body mount couplers.

Similar Threads

  1. Replies: 1
    Last Post: 22nd Dec 2018, 04:39 AM
  2. Product Review: Model Power FP7 Loco Disappoints
    By Jenna in forum Rollingstock
    Replies: 12
    Last Post: 22nd Apr 2018, 11:09 PM
  3. Product Review...willmodels Two-Story Hotel.
    By BryanC (RIP) in forum Structures & Scenery
    Replies: 6
    Last Post: 25th Apr 2012, 08:49 AM
  4. Product Review- IM Pillsbury Cylindrical Hopper
    By 16marvigj in forum Rollingstock
    Replies: 3
    Last Post: 8th Jul 2010, 08:26 PM
  5. DCC Product Review
    By jwaldo in forum DCC
    Replies: 7
    Last Post: 25th Sep 2004, 12:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •